What we did
Rodent proofing and the outside openings sealed, the attic and crawl space cleaned, and the old insulation replaced with new batts.
Batt insulation, fittedsnug between the joists.
New batts for attics and crawl spaces, cut to fit around pipes, wires and framing. Old, fallen or soiled batts come out first.
- 4.9 from 344 Thumbtack reviews
- Licensed, insured & bonded
- $300 off jobs over $2,000
Sound familiar?
- “The insulation under the house is hanging down.”
- “Our floors are cold, especially in the morning.”
- “We’re selling, and the inspection report flagged the crawl space insulation.”
- “Rodents tore up the insulation under the floor.”
Signs you need new batt insulation.
Check for these. If you see even one, book a free inspection and we will look at it with you.
- Bare spots under the floor where you can see the wood subfloor.
- Batts that are damp, stained or smell musty.
- Droppings on or inside the batts.
- Batts with nothing holding them up, sagging away from the floor.
- Attic batts that are thin, flattened or have gaps between them.
- Batts pushed aside during plumbing, electrical or cable work and never put back.
How we do it.
Free inspection
We check the attic or crawl space and photograph the old insulation.
Same-day written quote
Usually within 30–60 minutes of the inspection, with every item listed.
Old batts out
Fallen, torn or soiled batts are removed and the area is cleaned up.
New batts fitted
Cut to size and fitted snug between the joists, ways in sealed.
Job day, start to finish.
- We arriveThe crew comes at the time the office confirmed with you.
- We protect your homeThe path from the front door to the work area is covered with drop cloths or plastic sheeting: the floors, and the walls where needed.
- We do the workItem by item, as listed on your written quote.
- We clean upOld material and debris go out with us, and the work area is left clean.
- You get photosOur crew takes before and after photos and sends them to you.
What's included.
- Removal of old batts when needed
- Cleanup before the new insulation goes in
- New batts cut and fitted between the joists
- Entry points sealed with galvanized steel mesh, putty and concrete
Materials
- Kraft-faced batt insulation
- Galvanized steel mesh, putty and concrete for sealing
New batts are held up with metal wire supports, so they stay snug against the floor instead of sagging.
Comparing quotes? Check that each one lists:
- Every service, listed in detail: what gets done, where and how much
- The warranty on rodent proofing, and on the labor
- The sealing materials (ours: galvanized steel mesh, putty and concrete)
- The material brands that will be used
- The right type of insulation for your home
- The contractor's license and insurance
Our written proposals are thorough and list every item, so you can compare line by line.
Compare my quote with yoursWhy batts fall, and how we keep them up.
Under the house, batts often end up hanging or lying on the dirt. Usually they were never held up properly, got damp, or were pulled down by rodents. Fallen batts don't insulate the floor at all.
We take out the old, fallen batts, fit new ones snug between the joists and hold them in place with metal wire supports, so they stay up against the floor.
A finished job in Santa Clara.
Real jobs, finished.
Photos from AttiCali jobs in the Bay Area. No stock photos.
Before and after.
BeforeAfter
Materials and R-values.
We install any R-value, for any insulation type, based on what you ask for and what we recommend at the free inspection. It depends on the area: thicker in the attic, thinner in the crawl space.
Batts come in set thicknesses for each R-value. Under the floor we fit them snug between the joists and hold them up with metal wire supports, so they stay against the floor instead of sagging.
- R-38most common in the attic
- R-19most common in the crawl space, under the floor
- R-13to R-15, most common in walls
Questions, answered.
Cellulose or batts: which is better for me?
It depends on the space. Cellulose is our main attic insulation and is blown across the attic floor. Batts fit well under floors in crawl spaces and between framing. We recommend one at the free inspection and list it on the quote.
How are batts priced?
They are priced by the size of the space, after the free inspection. You get a written quote the same day as the inspection. 10% off when you book multiple services, or $300 off any job over $2,000 (one discount per job).
How are the batts held up?
With metal wire supports between the joists, so the batts stay pressed up against the floor and don’t fall onto the dirt.
How long does a batt insulation job take?
It is a one-day job.
What R-value do you install?
Any R-value you ask for, and we recommend one at the free inspection. Most common: R-19 under the floor in a crawl space, R-38 in the attic, and R-13 to R-15 in walls.
Can you replace the batts and the vapor barrier together?
Yes. New batts and a white vapor barrier can go in the same visit, along with crawl space cleaning. Two or more services get 10% off (one discount per job).
Do you take the old batts away?
Yes. Old, fallen or soiled batts come out and leave with us, and the area is cleaned up before the new batts go in.
How do you protect my home on job day?
The crew covers the path from your front door to the work areas with drop cloths or plastic sheeting: the floors, and some walls where needed. Old material and debris go out with us.
Do I need to be home on the job day?
Yes, please be home. It also helps to clear the path to the work areas of breakable items, like pictures and vases.
Often booked together.
One free inspection covers everything. Two or more services: 10% off (one discount per job).
Book your free inspection.
We check the attic, crawl space, garage and the openings outside, and send a written quote the same day. Monday to Friday, 8 AM to 5 PM.
$300 off any job over $2,000, or 10% off for seniors, expecting moms, veterans or multiple services. One discount per job.